Holtwood Marketing Ltd. The Survey Centre, Meridian House,
Stanney Mill Road, Little Stanney, CHESTER CH2 4HX
Tel: 01622 710921  Fax 01622 717945 e-mail

Use: marking on pavements or bitumen-based surfaces. Fixed using a hammer. Material: high strength, electro-zinc plated steel. Diameter : 7.5 mm Lengths: 60 and 100 mm, Head diameter : 16 mm with centering point. Washer diameter: 30 mm. Packed in bags of 50

Length 100mm ref: 75100-47

Use: marking on hard surfaces. Fixed with a hammer. Material: high strength, electro-zinc plated steel. Diameter : 9 mm, L : 60, 75 and 100 mm. Wide head, Diameter : 26 mm with centring point. Packed in bags of 50

Length 75mm ref: 9075-47

Length 100mm ref: 90100-47

Use; marking on hard surface. Fixed with a hammer. Material: High Strength, clectro-zinc plated steel. Diameter : 4 mm, L : 25 mm Wide head, diameter: 10 mm with centring point. "Calibel" washer, diameter : 25 mm Nails and washers are packed separately in bags of 500.

Calibel washer
 ref: 250501-47

Use: marking on macadamised shoulders. Material: High strength, electro-zine plated steel. Diameter : 14 mm, L : 150 and 200 mm. Head diameter: 22 mm with centring point. Packed in bags of 10.

Length 200mm ref: 14200-47

Use: marking on walls, facades, etc. Material: brass. Delivered with plastic plug. Drilled with a front hole of diameter 12 mm. Head diameter: 30 mm with centring point. L : 45 mm. Packed in bags of 10.

Aluminium 25mm x L=60mm

Electroplated 25mm x L =97mm

Electroplated ref: 970-47

 Sharp pointed wooden peg Cross-section: 35 x 35 mm. Length: 350 mm Cross-section: 50 x 50 mm. length: 500 mm Top end painted red Packed in bags of 50

section 50  x 50 
 ref: 5050-47

 Material: high strength plastic. Colour: topo yellow. Head diameter: 30 mm with centring point. L : 240 mm Packed in batches of 50

Material: hot galvanised steel or white-coloured Diameter : 5 mm. L : 340 mm Packed in bags of 100.

White ref:15300-47