Holtwood Targets, Scales etc

		Holtwood Marketing Ltd. The Survey Centre, Meridian House, Stanney Mill Road, Little Stanney, CHESTER CH2 4HX Tel: 01622 710921 Fax 01622 717945 e-mail

Targets, Scales etc.

Plastic target holders which can be mounted on a wall using a rawlplug and screw. The target disk then covers the mounting screw, and the disk is secured by two screws and washers. At the end of the job, everything except the rawlplug can be recovered and re-used. Target housing complete with cross targets Cat. No. 13a Target housing complete, but with concentric circle target Cat. No. 13b

Aluminium targets in black and silver. Can be mounted either by screws and rawlplugs, or by epoxy adhesive. Target 60 x 60mm Cat. No. 139-1 Target 100 x 100mm Cat. No. 139-2
Two-axis reference scale, black on silver aluminium. Millimetre graduations, references every 5 and 10 mm. Can be screw mounted, or epoxy glued. Cat. No. 13f-A 20cm level reference scale, black markings on silver aluminium. Millimetre graduations, references every 5 and 10mm. Can be either screw mounted, or epoxy glued. Cat No. 13n-20
Low cost cast aluminium 3-dimensional mark, for mounting with epoxy adhesive on surfaces which may not or cannot be penetrated. Cat. No. 19a
Plain cast aluminium disk with centre point for mounting with epoxy adhesive. Cat. No. 19f
Two-pack epoxy resin in handy applicator which gives the correct mixture. For sticking targets and scales, or setting bolts etc. in holes. 28g pack will cover about 330 sq. cm.

010819
060628
060701